Perimeter edge Metal - Pre-assembled vs Make your own.
« Back To Roofers Talk
Viewing 3
replies - 1 through 3
(of 3 total)
Author
Posts
February 26, 2020 at 3:25 p.m.
vickie
Perimeter edge Metal - Pre-assembled vs Make your own. What are you doing as a commercial contractor?
April 7, 2020 at 11:29 a.m.
MetalDirect
2003 IBC section 1504.5 says ES-1 compliant edge metal systems are required. If you are doing it any other way you will be held responsible for the roof failure. There are no "arguments" for either way, its code required. IIBEC consults are aware and are looking for this. Be smart....install your roof system per the building code.
March 6, 2020 at 8:08 a.m.
MaxieG
I've heard a lot of arguments for pre-assembled roof edge systems, since they are easy to install.
March 4, 2020 at 1:11 p.m.
grandpa
We use both, but depends on the job. I would say we are about 95% custom made
Viewing 3
replies - 1 through 3
(of 3 total)
You must be logged in to reply to this topic.
