Any pictures of.....

how to properly flash a chimney and electric riser with EPDM? These are both in the center of the roof. I could butcher them in but looking for better ideas :)

Thanks!>>>

woa...calm down Mac! be for you get us both kicked off of hear :laugh:>>>

actually FNRUFR, you couldn't be more wrong! (But I am sure you are use to that) I was merely trying to gage his level of knowledge so I could send him some info. Because, based on his answer, he is bound to have more questions and a more comprehensive, long term solution could be the best answer.

>>>

Classic Mac ATTACT ! :woohoo:>>>

CIAK...Yes, I have done shingled roofs on my own, full time since 1994 but I can count the single ply roofs I have done on 1 hand and they were all EPDM. I have never had to do EPDM where there was penetrations in the middle of the field. Thanks for the help guys!

Randy>>>

http://eyedessert.wordpress.com/2009/01/26/the-man-show-the-monkey-bar-blew-a-seal/ Check it out funny>>>

Randy, Are you knew to single ply membranes for the most part?

Mac>>>

That is some fine looking work!>>>

Mike that's some impressive app's>>>

what ...no oinkers?.......pig tail fold?>>>

Mike, how is the water supposed to leak in if you spend all of timne to do it like that?>>>

HOP Those pics of the stucco chimney look like Florida. Hey Randy on another note how did the pricing turn out for you on the " Is this a bone job or am I missing something " topic. Hop we are required to build a cricket behind those chimney details per code these days.>>>

The risers have pre-made split boots for them. The chimney, you would flash like any other vertical surface. Glue it up, install the corners. and install a termination bar and caulk it.>>>